Secret Code For IPhone , Samsung …

Iphone secret codes tips and tricks

*3001#12345#* + tap Call. Enter Field Mode. Field mode contains lots of iPhone inner settings, especially newest network and cell information.

*#06# Shows your IMEI. No need to tap Call. IMEI is the unique identifier for your mobile phone hardware.

*777# + tap Call. Account balance for prepaid iPhone only.

*225# + tap Call. Bill Balance. (Postpaid only)

*646# + tap Call. Check minutes (Postpaid only).

*#21# + tap Call. Set interrogation for call forwards. Discover the settings for your call forwarding. You’ll see whether you have voice, data, fax, SMS, sync, async, packet access, and pad access call forwarding enabled or disabled.

*#30# + tap Call. Check the calling line presentation. This shows whether you have enabled or disabled the presentation of the calling line, presumably the number of the party placing the call.

*#76# + tap Call. Check whether the connected line presentation is enabled or not. State whether the connected line presentation is enabled or disabled. Similar to the calling line presentation.

*#43# + tap Call. Determine if call waiting is enabled. Shows call waiting status for voice, data, fax, SMS, sync data, async data, packet access and pad access. Each item is either enabled or disabled.

*#61# + tap Call. Check the number for unanswered calls. Show the number for voice call forwarding when a call is unanswered. Also show the options for data, fax, SMS, sync, async, packet access and pad access.

*#62# + tap Call. Check the number for call forwarding if no service is available. Just like the previous, except for no-service rather than no-answer situations.

*#67# + tap Call. Check the number for call forwarding when the iPhone is busy. And again, but for when the iPhone is busy.

*#33# + tap Call. Check for call control bars. Check all the usual suspects (voice, data, fax,SMS, etc) to see whether barring is enabled or disabled for outgoing.

Increase iPhone 3G’s Battery Life

Change screen brightness

the screen brightens uses more battery power. Change this under Settings -> Brightness

Turn off 3G

If you are in a location where 3G does not work, then you will not need to activate this service on your iphone and you do not get any benefit from the phone battery-hungry 3G radio. By turning it off, you double the length of your iPhone 3G battery, 5 hours of talk time to 10.
For turning off 3G : In home screen, tap Settings / General / Network /
Enable 3G Off

Turn off Wi-Fi

As with 3G , If you are in a location where Wi-Fi does not work, then you will not need to activate this service on your iphone and you do not get any benefit from the phone battery.
to do that : In home screen, tap Settings/Wi-Fi/On/Off.

Turn off Bluetooth

If you’re not using a Bluetooth headset, then for heaven’s sake shut down that Bluetooth radio. In Settings, tap General, and turn off Bluetooth.

Turn off push e-mail

If your email, calendar, and address book are kept constantly synced with your Macs or PCs, then you’ve probably gotten yourself involved with Yahoo Mail, Microsoft Exchange , or MobileMe . It’s pretty amazing to know that your iPhone is constantly kept current with the mothership-but all that continual sniffing of the airwaves, looking for updates, costs you battery power. If you can do without the immediacy, visit Settings / Fetch New Data ; consider turning off Push and letting your iPhone check for new information, say, every 15, 30, or 60 minutes.

Turn off GPS

If you are not be needing the iPhone to track your location, save it the power required to operate the GPS chip and the other location circuits.
In Settings, tap General, and turn off Location Services.

Samsung secret codes

*#06# IMEI code

*#9998*4357# Help Menu

*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)

*#9999#0# Monitor Mode

*#9999# or *#9998*9999# Software Version

*#8888# or *#9998*8888# Hardware Version

*#9998*746# or *#9998*0746# or *#0746# Sim Infos

*#9998*523# or *#9998*0523# or *#0523# Display Contrast

*#9998*842# or *#9998*0842# or *#0842# Vibration On (until you push OK)

*#9998*289# or *#9998*0289# or *#0289# Buzzer On (until you push OK)

*#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos

*#9998*377# or *#9998*0377# Error log

*#9998*778# or *#9998*0778# or *#0778# Sim Service table

*#9998*782# show date and alarm clock

*#8999*638# show network information

*#9998*5646# change operator logo at startup

*#9998*76# production number

*#9998*968# view melody for alarm

*#9998*585# Non-Volatile Memory (NVM)

*#3243948# Digital Audio Interference Off

*#32436837# Digital Audio Interference On

*#1111# S/W Version

*#1234# Firmware Version

*#2222# H/W Version

*#8999*8376263# All Versions Together

*#8999*8378# Test Menu

*#4777*8665# GPSR Tool

*#8999*523# LCD Brightness

*#8999*377# Error LOG Menu

*#8999*327# EEP Menu

*#8999*667# Debug Mode

*#92782# PhoneModel (Wap)

#*5737425# JAVA Mode

*#2255# Call List

*#232337# Bluetooth MAC Adress

*#5282837# Java Version

Type in *#0000# on a Samsung A300 to reset the language

Master reset(unlock) #*7337# (for the new samsungs E700 x600 but not E710)

Samsung E700 type *#2255# to show secret call log (not tested)

Samsung A300, A800 phone unlock enter this *2767*637#

Samsung V200, S100, S300 phone unlock : *2767*782257378#

#*22671# AMR REC START

#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)

#*22673# Pause REC

#*22674# Resume REC

#*22675# AMR Playback

#*22676# AMR Stop Play

#*22677# Pause Play

#*22678# Resume Play

#*77261# PCM Rec Req

#*77262# Stop PCM Rec

#*77263# PCM Playback

#*77264# PCM Stop Play

#*22679# AMR Get Time

*#8999*364# Watchdog ON/OFF

*#8999*427# WATCHDOG signal route setup

*2767*3855# = Full Reset (Caution every stored data will be deleted.)

*2767*2878# = Custom Reset

*2767*927# = Wap Reset

*2767*226372# = Camera Reset (deletes photos)

*2767*688# Reset Mobile TV

#7263867# = RAM Dump (On or Off)

#*4773# Incremental Redundancy

#*7785# Reset wakeup & RTK timer cariables/variables

#*7200# Tone Generator Mute

#*3888# BLUETOOTH Test mode

#*7828# Task screen

#*#8377466# S/W Version & H/W Version

#*2562# Restarts Phone

#*2565# No Blocking? General Defense.

#*3353# General Defense, Code Erased.

#*3837# Phone Hangs on White screen.

#*3849# Restarts Phone

#*7337# Restarts Phone (Resets Wap Settings)

#*2886# AutoAnswer ON/OFF

#*7288# GPRS Detached/Attached

#*7287# GPRS Attached

#*7666# White Screen

#*7693# Sleep Deactivate/Activate

#*2286# Databattery
#*2527# GPRS switching set to (Class 4, 8, 9, 10)

#*2679# Copycat feature Activa/Deactivate

#*3940# External looptest 9600 bps

#*4263# Handsfree mode Activate/Deactivate

#*2558# Time ON

#*3941# External looptest 115200 bps

#*5176# L1 Sleep

#*7462# SIM Phase

#*7983# Voltage/Freq

#*7986# Voltage

#*8466# Old Time

#*2255# Call Failed

#*5376# DELETE ALL SMS!!!!

#*6837# Official Software Version: (0003000016000702)

#*2337# Permanent Registration Beep

#*2474# Charging Duration

#*2834# Audio Path (Handsfree)

#*3270# DCS Support Activate/Deactivate

#*3282# Data Activate/Deactivate

#*3476# EGSM Activate/Deactivate

#*3676# FORMAT FLASH VOLUME!!!

#*4760# GSM Activate/Deactivate

#*4864# White Screen

#*7326# Accessory

#*7683# Sleep variable

#*3797# Blinks 3D030300 in RED

#*7372# Resetting the time to DPB variables

#*3273# EGPRS multislot (Class 4, 8, 9, 10)

#*7722# RLC bitmap compression Activate/Deactivate

#*2351# Blinks 1347E201 in RED

#*2775# Switch to 2 inner speaker

#*7878# FirstStartup (0=NO, 1=YES)

#*3838# Blinks 3D030300 in RED

#*2077# GPRS Switch

#*2027# GPRS Switch

#*0227# GPRS Switch

#*0277# GPRS Switch

*#7465625# = Check the phone lock status

*7465625*638*Code# = Enables Network lock

#7465625*638*Code# = Disables Network lock

*7465625*782*Code# = Enables Subset lock

#7465625*782*Code# = Disables Subset lock

*7465625*77*Code# = Enables SP lock

#7465625*77*Code# = Disables SP lock

*7465625*27*Code# = Enables CP lock

#7465625*27*Code# = Disables CP lock

*7465625*746*Code# = Enables SIM lock

#7465625*746*Code# = Disables SIM lock

*7465625*228# = Activa lock ON

#7465625*228# = Activa lock OFF

*7465625*28638# = Auto Network lock ON

#7465625*28638# = Auto Network lock OFF

*7465625*28782# = Auto subset lock ON

#7465625*28782# = Auto subset lock OFF

*7465625*2877# = Auto SP lock ON

#7465625*2877# = Auto SP lock OFF

*7465625*2827# = Auto CP lock ON

#7465625*2827# = Auto CP lock OFF

*7465625*28746# = Auto SIM lock ON

#7465625*28746# = Auto SIM lock OFF

*2767*49927# = Germany WAP Settings

*2767*44927# = UK WAP Settings

*2767*31927# = Netherlands WAP Settings

*2767*420927# = Czech WAP Settings

*2767*43927# = Austria WAP Settings

*2767*39927# = Italy WAP Settings

*2767*33927# = France WAP Settings

*2767*351927# = Portugal WAP Settings

*2767*34927# = Spain WAP Settings

*2767*46927# = Sweden WAP Settings

*2767*380927# = Ukraine WAP Settings

*2767*7927# = Russia WAP Settings

*2767*30927# = GREECE WAP Settings

*2767*73738927# = WAP Settings Reset

*2767*49667# = Germany MMS Settings

*2767*44667# = UK MMS Settings

*2767*31667# = Netherlands MMS Settings

*2767*420667# = Czech MMS Settings

*2767*43667# = Austria MMS Settings

*2767*39667# = Italy MMS Settings

*2767*33667# = France MMS Settings

*2767*351667# = Portugal MMS Settings

*2767*34667# = Spain MMS Settings

*2767*46667# = Sweden MMS Settings

*2767*380667# = Ukraine MMS Settings

*2767*7667#. = Russia MMS Settings

*2767*30667# = GREECE MMS Settings

Type *#9998*627837793# Go to the ‘my parameters’ and there you will find new menu where you can unlock phone.(not tested-for samsung C100)
To unlock a Samsung turn the phone off take the sim card and type the following code *#pw+15853649247w# .
Java status code: #*53696# (Samsung X600)

If you want to unlock your phone put a sim from another company then type *#9998*3323# it will reset your phone. Push exit and then push 7,
it will reset again. Put your other sim in and it will say sim lock, type in 00000000 then it should be unlocked. Type in *0141# then
the green call batton and it’s unlocked to all networks. This code may not work on the older phones and some of the newer phones. If it doesn’t work you will have to reset your phone without a sim in it by typing *#2767*2878# or *#9998*3855# (not tested)

It may not work in all phones, but with standard its working😉

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: